BASIC Stamp BS2PE Module

$50.00

These are discontinued, New Old Stock (NOS) and once they’re gone, that’s it. See description below for product details.

5 in stock

SKU: BS2PE Category: Tags: , Brand:

Description

BASIC Stamp 2pe Overview:
The BASIC Stamp 2pe serves as the brains inside of electronics projects and applications that require a programmable microcontroller. It is able to control and monitor timers, keypads, motors, sensors, switches, relays, lights, and more. Programming is performed in an easy-to-learn language called PBASIC.

All vital components (processor, clock source, memory, power regulator) are provided on the BS2pe’s tiny PCB; just connect power and go! Projects needing small, permanent soldering area for circuitry may benefit from combining the BS2pe with the Super Carrier Board (#27130).

The BS2pe is useful for those that have previous experience with the BS2 and are building battery-powered or data logging applications. The execution speed is slower than the BS2p and the sleep and nap wake-up interval is less than 1 ms, so battery life is extended significantly.

For customers who require a more powerful, multi-processing microcontroller, we recommend the Propeller 1 or Propeller 2 microcontroller.

Key Features:

  • Small form factor requires very little space
  • Non-volatile memory holds up to 4,000 instructions even without power
  • PBASIC commands are easy to learn and remember
  • Commercial rating since Rev B
  • PCB assembled, programmed, tested, and completed in Rocklin, California, USA

    • BASIC Stamp 2pe Specifications:

  • Processor Speed: 8 MHz Turbo; ~6,000 PBASIC instructions/sec
  • PBASIC Commands: 61
  • Package: 24-pin DIP
  • I/O pins: 16 + 2 dedicated serial
  • RAM Size: 38 Bytes (12 I/O, 26 Variable)
  • Scratch Pad RAM: 128 bytes
  • EEPROM (Program) Size: 16 x 2 KBytes; (16 K for source; ~4,000 PBASIC instructions)
  • Voltage requirements: 5.5 to 12 VDC (Vin), or 5 VDC (Vdd)
  • Current requirements: 15mA Run, 150 μA Sleep
  • Source/Sink Current per I/O: 30 mA / 30 mA
  • Source/Sink Current per unit: 60 mA / 60 mA per 8 I/O pins
  • Communication: Serial (9600 baud for programming)
  • Dimensions: 1.20 x 0.63 x 0.15 in (30.0 x 16.0 x 3.81 mm)
  • Operating temp range (Rev C): -13 to +185 °F (-25 to +85 °C)

    • Related products