T48 Device Programmer
A review of the T48 Device Programmer, available via Amazon and many electronics distributors. ▼
-
-
Bambu Lab P1S 3D Printer
Overview and sample prints from my newest 3D printer, the P1S. ▲
-
Acrylic LED Sign Shim Overview
This video gives an overiew of a shim that fixes the spacing issue in my Acrylic LED Signs, which use 2mm stock, while the base is designed for thicker material.
-
Acrylic LED Sign Shim
This is a shim that fixes the spacing issue in my Acrylic LED Signs, which use 2mm stock, while the base is designed for thicker material.
-
Bambu Lab A1 3D Printer
Overview and sample prints from my newest 3D printer, the A1. ▲
-
Dual I2C Displays [Arduino]
This tutorial shows how to connect two SSD1306 I2C OLED Displays to the same two pins on the Arduino.
-
R-Pi 5 NAS Drive
This Raspberry Pi NAS Drive includes two 1TB Solid-State Drives in RAID 1 configuration, and can be built in an evening.
-
Parts Organization
The various ways I have organized my often quite expansive supply of electronics parts, sensors and projects, as well as future ideas.
-
Office Evolution
Over the years my office / workshop has seen many changes depending on where I lived. This is a running article describing my various workspace setups starting in 2007 when I first started sharing photos of my office / workshop.
-
Tauntek Logic IC Tester
7400,74LS,74HC,74C and 4000 series Logic IC Tester by Tauntek.
![Dual I2C Displays [Arduino]](https://savagecircuits.com/wp-content/uploads/2024/11/ArduinoDualDisplayI2C_00.jpg)
