Propeller Multicontroller – Part 1
The Propeller Multicontroller board; a DIY multi-purpose control board. This is part 1 of a 4-part series.
-
-
Wheel Platform Robot
A DIY robot platform designed to show off the Motor Mount and Wheel Kit.
-
Budget Robotics (Base on a Budget)
Building a robot platform on a budget with some examples of platforms built for minimal cost using different materials.
-
RFID Reader Software for Windows
This is an application I created in Visual BASIC 2005 Express which allows a Parallax RFID Reader Module connected to a PC to read and display tag data.
-
Solder Pot Controller
A custom solder pot controller which keeps the temperature at a specified set point using a BASIC Stamp Module and a Solid-State Relay.
-
Garage Parking Assistant
The Garage Parking Assistant makes it easy to pull in the garage by signaling you with a traffic light style display of when to pull in (GREEN), slow down (YELLOW) and stop (RED).
-
M5 Stuart Tank R/C Conversion
My progress converting a Radio Controlled M5 Stuart Tank into a microcontroller-controller, GPS tracking, tank tread robot.
-
HB-25 Motor Controller Tester
I designed this test fixture to ensure that each HB-25 that was manufactured, functioned normally before being sent to customers.
-
Accessory Tester
An accessory tester designed to test many different products from Parallax.
-
LCD Bar Graph Demo [BS2]
This tutorial shows how to draw different types of bar graphs on a Parallax 2×16 Serial LCD.
![LCD Bar Graph Demo [BS2]](https://savagecircuits.com/wp-content/uploads/2005/10/bargraphs_00.gif)
