![Dual I2C Displays [Arduino]](https://savagecircuits.com/wp-content/uploads/2024/11/ArduinoDualDisplayI2C_00.jpg)
Dual I2C Displays [Arduino]
This tutorial shows how to connect two SSD1306 I2C OLED Displays to the same two pins on the Arduino.
-
-
Arduino OEM [Arduino]
This tutorial describes how to integrate an Arduino into your project in an OEM form.
-
Raspberry Pi to Serial LCD
This tutorial involves sending serial data to a serial LCD from a Raspberry Pi using the Scratch programming language.
-
Door Control – Part 3 [BS2]
This article is part 3 of 3 discussing motorized door control.
-
Door Control – Part 2 [BS2]
This article is part 2 of 3 discussing motorized door control.
-
Door Control – Part 1 [BS2]
This article is part 1 of 3 discussing motorized door control.
-
Emic 2 Sentence Indexing [SPIN]
This tutorial demonstrates how to access text strings using an index via an array of mixed length, zero-delimited text strings.
-
XBee Wi-Fi Robot Control [SPIN]
This tutorial shows how an ActivityBot can receive commands from an Android App via XBee Wi-Fi using TCP.
-
RGB LED Temperature Indicator [SPIN]
This tutorial shows how you can use the WS2812B RGB LED to display the temperature using color.
-
XBee Wi-Fi Over WAN IP [SPIN]
This tutorial was created to demonstrate how to communicate over the internet using an XBee Wi-Fi (S6B).
![Arduino OEM [Arduino]](https://savagecircuits.com/wp-content/uploads/2023/01/Arduino_OEM_00.jpg)
![Door Control – Part 3 [BS2]](https://savagecircuits.com/wp-content/uploads/2016/11/Door_Control_3_00.jpg)
![Door Control – Part 2 [BS2]](https://savagecircuits.com/wp-content/uploads/2016/10/Door_Control_2_00b.jpg)
![Door Control – Part 1 [BS2]](https://savagecircuits.com/wp-content/uploads/2016/09/Door_Project_1_00.jpg)
![RGB LED Temperature Indicator [SPIN]](https://savagecircuits.com/wp-content/uploads/2023/07/Color_Temp_00a.gif)
