A PROJECT WEBSITE DEVOTED TO ELECTRONICS & MICROCONTROLLERS AND THE THINGS WE CREATE
The Prop Dropper 2 allows you to drop scary Halloween props, such as bats and spiders onto unsuspecting trick-or-treaters and play scary sounds at the same! Built around the Parallax Propeller microcontroller, this project is highly customizable and expandable.
The Arlo Robotic System is mid-size platform ideal for telepresence and autonomous robots.
This article will wrap up the build of this flexible robot platform by finalizing the build to a point where we can experiment with some code and build off from that.
This robot platform is easy to build, inexpensive and flexible enough to support a number of options for the control board, motor drive, power and sensors. It also looks really cool and moves very well.
![XBee 802.15.4 to PC Demo [P8X32A]](https://savagecircuits.com/wp-content/uploads/2014/03/XBee_PC_00.jpg)
The XBee 802.15.4 to PC Demo provides an example of communication between any Series 1 XBee Module and the PC, using the XStick 802.15.4.
This demo provides a two-way communication channel for a remote device which can receive telemetry and respond to commands.
This demo provides an example of communication between the RN-42 Bluetooth Module and another device capable of supporting Bluetooth SPP, such as a PC or Smartphone.
A 3-part series on using geometry to make GPS Navigation easy. This is part 3 of a 3-part series.
A 3-part series on using geometry to make GPS Navigation easy. This is part 2 of a 3-part series.
This episode follows and details the Garage Parking Assistant article published in the January 2010 issue of Nuts & Volts.
No products in the cart.