GPS Navigation – Part 1
posted in: Robotics Projects
0
A 3-part series on using geometry to make GPS Navigation easy. This is part 1 of a 3-part series.
GPS Datalogger
posted in: BASIC Stamp Projects
0
A GPS Datalogger for tracking a vehicle and recording the travel coordinates to a USB Thumb Drive for display in Google Earth.
Propeller Multicontroller – Part 4
posted in: Propeller Projects
0
The Propeller Multicontroller board; a DIY multi-purpose control board. This is part 4 of a 4-part series.
BASIC Stamp Module Tester
posted in: BASIC Stamp Projects
0
Test your BASIC Stamp Modules for bad I/O pins, RAM and other issues that may cause problems in your projects.
Propeller Multicontroller – Part 1
posted in: Propeller Projects
0
The Propeller Multicontroller board; a DIY multi-purpose control board. This is part 1 of a 4-part series.
Budget Robotics (Base on a Budget)
posted in: Robotics Projects
0
Building a robot platform on a budget with some examples of platforms built for minimal cost using different materials.
RFID Reader Software for Windows
posted in: PC Applications
0
This is an application I created in Visual BASIC 2005 Express which allows a Parallax RFID Reader Module (#28140 or #28340) connected to a PC to read and display tag data.
Solder Pot Controller
posted in: BASIC Stamp Projects
0
A custom solder pot controller which keeps the temperature at a specified set point using a BASIC Stamp Module and a Solid-State Relay.
Garage Parking Assistant
posted in: BASIC Stamp Projects
0
The Garage Parking Assistant makes it easy to pull in the garage by signaling you with a traffic light style display of when to pull in (GREEN), slow down (YELLOW) and stop (RED).
M5 Stuart Tank R/C Conversion
posted in: Robotics Projects
0
My progress converting a Radio Controlled M5 Stuart Tank into a microcontroller-controller, GPS tracking, tank tread robot.